Post questions and comments about this site.
Submit pictures of your ride!
I'll start: Jefferson NJ
Akrider had a great idea for a check-in / user introduction page, so here it is: post a pic and introduce yourself! Andy Winters Age 39 Owner of WoodsRacer.Com trail and dual sport rider (B level enduro rider) Jefferson NJ Computer Networking by trade
check it out here. http://www.offroadviking.com/david_knight.html
Well, as I have had a weird occurrence two weeks ago and broke my ankle, I find myself doing the winter rebuild a bit early this year. No big deal. Actually got lucky on the break, broke in three places, but all below the joint and no surgery or anything needed. Should heal fine in 6 weeks they...
Does anyone know what the status of the TM parts supplier Motoxspeed is? I have faxed orders, left messages, and emailed all with no resonse. Thanks.
hey all. i just got a cr144 and i havent a clue where to get a piston. i heard alot about eric gorr but can never get ahold of them. so does anyone know where i can get a piston for it. the bike is a 99.
Got it from the rep at Loretta's. Yamaha is definatly going to introduce an off road version if the yz250. He wouldn't say when or go into detail, but the 2 stroker is coming!!
Hi, I just got this letter in the mail today from Motor Vehicle, here it is: To All Registered Motorcycle Owners: Due to a change to the state vehicle inspection law, motorcycles will no longer be required to submit for an inspection as of August 1st, 2010. If your motorcycle is due for...
I'm turning 58 and have decided to stick to my streetbikes. With three Ducatis I need cash to keep them on the road. It is only for that reason I am willing to part with my old friend. This bike is terrific, has gnarly pipe and is tuned for torque. Flywheel weight makes it feel like a four...
I race a 2006 yz250 in hairscrambles ranging from South Jersey to NY,PA,DE what tire would be the best for pretty much all riding terrains
i have a 2008 ktm 200 xc and i broke the front pipe and i was wonder if a 2003-2006 KTM 200 SX Pro Circuit Platinum exhaust pipe would fit my bike that or else i any one knows of a pipe besides geting another stock pipe that will fit it
Hi guys, Just trying to get a feel for how many people in the offroad community use autoclutches (Rekluse, EFM, Revloc). If so, do you also use a left hand rear brake? Are you on a bike with a hydraulic clutch? Do you want a left hand rear brake but are scared to lose clutch override on a...
I am just curious to see what year model bikes people are riding and racing. I am currently racing a KX 250 2005 in harescrambles and I have had the bike for about 2 1/2 years.
What is the difference between the "check point seconds" (center of the display) and the "late/early" seconds (upper right on display) on the Checmate computer?
I did some searching on Saturday to try to find a good ez pull lever. I just can't take the arm pump I am getting from clutching in the tight trails I ride. I was about to order a MSR one until I ran across this Righteous Stunt Clutch lever. Seems like this guy has good reviews on many of the stunt...
heres a cool interview i found with barry hawk. http://www.offroadviking.com/barry_hawk.html
I would like some help. My drz400e blows for really tight trails on the stock gearing. I think it is 14/47. My cr250 is pretty bad too. What would be the beast gearing for the bikes? I also need a good rear tire for my drz400. Never buy a teraflex. they are wayyyy to wide and make the bike ride...
So what do you think about this web sit? 1. Best thing since sliced bread (visit every couple hrs) 2. Its real cool ( here once, or twice a day) 3. Just another web site (visit when tired of other sites) 4. Just passing through:D
Dear Customer, Dear Customer,Bike Bart Ltd is one of the Best Selling Bike Distributor.We are Legitimate registered Company under licensed number (06167923). We have a promo going on now,we offer 10% Discount in Any Bike Buy From The Company,We ship out via UPS,FEDEX OR DHL, and your ordered...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
